Red Max's 900ss
By Anthony van Someren - 05 Apr 13

His brief was to "cafe the 900SS, with 2 into 1 under seat exhaust, sort of rat looking, with less polishing more riding, bikini fairing and old school", and as the build progressed it quickly exceeded his expectations.
"Photo mockups were produced with me giving Steve the shits with literally hundreds of emails "umming and ahhing" trying to decide the exact route to go, looking at the tank, fairing and seat options available and that big decision, what colour and which graphics..." "First off was a fairing. Steve had the plan to use a Norton fairing with a removable headlight cover to maintain the racer look, but the fairing was massive and I was dubious. Steve took my comments onboard and it was shaved down to within an inch of its function and the tight look I wanted was there. Different seat options were looked at that would work with my under seat exhaust along with various upgrades proposed, my confidence in Steve's work grew to the point I just replied to his further suggestions with "sure, do it"!""The tank was an issue and I really had my heart set on an aftermarket 70's SS style tank, but that wasn't going to happen unless I pulled the expense pin on something completely customised. So the next best plan was to cut the side scallops out of the original tank and make her look right. I think this part of the bike is what I really like the most, it changed that bulbous original into a sleek one off custom that's a credit to Steve and his team..."
"I made a decision to not worry about doing any major mechanical upgrades apart from the 41mm FCR's, as the bike is plenty fast enough for what I need. I almost lost the original Verlicchi aluminium swing arm due to a sprocket bolt coming loose, but Steve saved it. Rebuilt the Marzocchi's on the front, tidied up the brake lines with some Goodrich braided hoses, beautiful new Hagon rear shock that proved a troublesome fit, 916 fluid pots and levers, custom mounted old school looking headlight, a beautiful pair of rear sets to match the cut and coated hangers, coated everything else, and throughout Steve utilised all the existing parts he could and fabricating where he couldn't....."